Frequently Asked Questions

Should Aluminium be considered as a tooling material?

We believe aluminium tooling offers significant benefits in the right applications:

  1. Being a softer metal, it is faster to machine. This can have price benefits and result in faster delivery times.
  2. Aluminium has a better thermal conductivity than steel, with the potential therefore to offer reduced cycle times.
  3. For high gloss finishes, it can be polished about 30% faster.

Commonly asked questions:

Is aluminium a good material to use as a mould tool?

First and foremost it is important that we are talking tooling grade aluminium, 7000 series or higher. Softer grades will only survive very short runs and are frequently behind the bad stories that people recite.

Ask any moulder about aluminium and tooling, and they will all acknowledge that aluminum being softer than the more traditional tool steels requires a little more attention.  It is therefore important to always use a moulder who has experience with aluminium tools, in order that the moulds are looked after.

Alongside this, it is imperative that the mould is designed and built properly for effective moulding, which will in turn prolong the life of the tool.

How long will an aluminum tool last?

Some tools still run with well over 100,000 shots on them. However, the criteria for aluminum tooling is changing; in the past it tended to be used only for prototype tooling. You would get 50, 100 maybe 1,000 parts to be used for testing etc and you would then build a steel tool for the production parts.

Today aluminum tools are being used for 50,000, 100,000+ shots for production on occasions. Modern surface coatings can also be applied that will extend the aluminum tool life.

The key to longevity is the moulded material, start adding fillers like glass and the associated tool maintenance will increase, especially in high wear areas like the gates.

What are the best applications to use an aluminium tool for

Certainly less complicated parts, point of sale and parts that use a non-abrasive material like a polypropylene or a TPE, work well with aluminum tools. Higher volumes using more abrasive materials (e.g. glass-filled, ABS) will obviously have a negative impact and shorten the length of the tool life.

What are the surface finish implications of using an aluminium tool?

Most surface finishes can be re created on an aluminium tool. However textured finishes will not last as long and its best to allow for an increased amount of draft to help with this.

Can you expect the same features using an aluminium tool, as you would do with a steel tool?

Usually yes, although some small features may well require inserting in steel to ensure a reasonable life.

How long does it take to make an aluminium tool?

How long is a piece of string?! This obviously depends on the complexity of the parts, however a simple tool can be produced in a couple of days, whereas more complex tools will require several weeks. 

Who owns the tool once it is made?

The tool remains the property of the client once it has been made unless otherwise arranged. Exceptions to this are where MUD frames (fixed bolsters with interchangeable mould inserts), in which case the client would own the inserts only. Plunkett Associates take responsibility for the storage and maintenance of the tool on behalf of the client.

Can parts be overmoulded with an aluminium tool?

Yes, we would first mould a rigid plastic substrate, then a soft rubber or TPE would be moulded onto or around the substrate. This is often used for products that need a soft grip area to a rigid part.

Do you know a toolmaker who is experienced in making aluminium tools?

Yes, Plunkett Associates have trusted suppliers in the UK in cluding our own sister company, Adept Precision. If tooling is originating from the Far East, then we would source steel tools as controlling the grade of aluminium used can prove challenging! 

  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor

Read more expert articles in our FAQ section where we discuss topics on materials, methods and products.

Back to FAQs
  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
    Simon Leggett, Director,  Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor
    Jet Cooper, Sculptor