Frequently Asked Questions

Natural & Synthetic Rubbers - what are they and how are they used?

Natural rubber is produced from latex, tapped off a rubber tree. Uncured, this rubber has limited application (e.g. adhesives, cements, etc.) and is unlike our expectation of what ‘rubber’ should be. However, after undergoing mastication, blending, calendering, extrusion and finally vulcanisation, it becomes the product we know.

Rubber glovesNatural rubber, or latex is used mostly in car tyres and medical products.

Vulcanised rubber is mainly used to produce automotive tyres, however there are a large number of additional applications, including seals and medical products (e.g. surgical gloves). Whilst some people are allergic to latex, it is also susceptible to bacterial attack, making natural rubber unsuitable in certain applications.

Rubber tyres

The most common synthetic rubber is silicone

Synthetic rubbers are petroleum based, and compared with natural rubber, currently provide the majority of rubber worldwide. There are many forms of synthetic rubber, and one such type, which is used in a number of industrial applications, is Silicone rubber. Others include Neoprene, EPDM, Viton and Nitrile.

Compared with natural rubbers, synthetic rubbers exhibit superior thermal stability, as well as improved compatibility with petroleum products. Similarly to natural rubber, synthetic rubbers are used mainly for tyres, seals, etc but have a larger number of consumer applications.Silicone parts

Silicone rubbers are used in many consumer and industrial applications

Silicone rubber is more resistant to heat, UV, chemicals as well as fungal and Ozone attacks than natural rubber. Consequently it has found many uses in, for example, cookware, involving bacteria, chemicals and heat.

Please refer below for physical comparisons between natural rubber and synthetic rubbers: 

Rubber materials comparison chart

There are 3 common processes

There are 3 common processes, and these can be used for both materials:

  • Injection moulding – Using this process, thin wall sections are possible. Injection moulding is mainly used for high volume runs, on tight tolerance parts where the tooling can be justified.
  • Compression and transfer moulding – Compared with injection moulding, tooling is less complex, and has a lower cost. These processes are most suited to low - medium volume manufacture. The cycle is labour intensive leading to multi-cavity tooling for higher quantities, to control the economics.
  • Extrusion – involves ‘continuous vulcanisation’ where the rubber is extruded and vulcanised at the same time. Sharp edges on parts can cause rough surfaces to be produced, and radii would need to be applied. Co-extrusion allows multi-material parts to be produced.

As a consequence of the quantities that Plunkett Associates are usually involved with, compression moulding is the most applicable for:

  • prototyping where production materials are required, and
  • low volume production.

If your project requires a rubber part, please talk to us. We are able to help.

  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor

Read more expert articles in our FAQ section where we discuss topics on materials, methods and products.

Back to FAQs
  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
    Simon Leggett, Director,  Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor
    Jet Cooper, Sculptor