Frequently Asked Questions

What are my options for manufacturing a clear part? We look at Polyjet.

To demonstrate the different manufacturing options for producing a clear part, we have taken a simple two-part 'housing' and produced it using Polyjet.

Additive Manufacture by PolyjetPhotograph 5 -16 micron matt

Let's take a look at the results achieved from producing this simple two-part 'housing' straight from the machine using the additive technique, Polyjet. You can compare these results with the results we achieved producing the same part by CNC machining here.

The material we used was Vero Clear - a proprietary material developed by Objet specifically for the Polyjet printing process. Polyjet is basically similar to inkjet printing where the ink has been replaced by a photopolymer that cures in the presence of UV light.Photograph 6 - 16 micron gloss inside

Parts are built in layers that can be either 16 or 30 micron thick. The component is ‘supported’ by a soluble support structure that is removed as a post process.

The final option is whether you select a ‘glossy’ finish. This only applies to the upward facing surfaces and all supported areas will be ‘matt’.

Photograph 7 - 16 micron gloss outsideComparitive finishes

Hence we have: a matt finish, a glossy internal finish and a glossy external finish, all at 16 and 30 micron

… a total of six assemblies.

Photographs five, six and seven (see images) are all 16 micron layers, and photographs eight, nine and ten are all 30 micron layers. In each case the glossy finish does improve the clarity, however some demonstrate a slightly frosted edge, which is presumed to be an optical effect from the layering.Photograph 8 - 30 micron matt

The price difference between 16 and 30 micron layers amounts to approximately 15% on a part of this size (35x25x10mm). By next month we will have polished these and be able to comment on whether the layer thickness made a noticeable difference to the time required.

So, compared to the unpolished CNC version, these parts offer better clarity. To compare polished with unpolished we will have to wait a bit longer!Photograph 9 - 30 micron gloss inside

Leadtimes are quick!

However, the showstopper is lead-time. Allowing for normal queuing through a bureau service, these items would be in your hands in about four days. You can double that for CNC machining. Build time is a fraction of that, so with some special arrangements these parts could be on a courier to you in 24 hours! Even when we factor in polishing this is likely to be the quickest way to generate clear parts.Photograph 10 - 30 micron gloss outside

And one more thing, UV light tends to improve the clarity further, rather than introduce a yellowing as can happen with some Stereolithography resins.

  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor
Related Processes

CNC Machining

The benefits of CNC parts include substantial flexibility in material choice, high accuracy and repeatability.

more info

Digital Light Printing (DLP)

Digital Light Printing (DLP) is a form of 3D Printing that is extremely quick and accurate!

more info

Read more expert articles in our FAQ section where we discuss topics on materials, methods and products.

Back to FAQs
  • “Plunkett Associates have excellent breadth of experience, work with high quality partners and have a flexibility that we have found enables challenges to be met successfully, cost effectively and in a timely manner.”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • Plunkett associates always find a solution. Whatever we need to prototype, they have a great grasp on the technologies available, costs and lead-times so we get the right solution tailored to the project needs. Have always delivered and never let us down.
    Naim Audio
    Naim Audio
  • “I can’t recommend Tim and his team highly enough. We ended up with a design which can be produced and assembled quickly, efficiently and reliably, in volumes that make sense”
    Simon Leggett, Director, Olivewood Technology
    Simon Leggett, Director,  Olivewood Technology
  • "Tim's experience, expertise and supplier base have been fundamental to us getting this project off the ground."
    Sam Pearce, Jelly Products Ltd
    Sam Pearce, Jelly Products Ltd
  • “We were really surprised at how quickly they turned round such a high quality prototype and the parts certainly proved their worth. They were of high enough quality to provide a fantastic visual representation and to undergo rigorous testing."
    Stuart Wilson, Design Director, TRT Lighting
    Stuart Wilson, Design Director, TRT Lighting
  • “Accuracy, finish and delivery all first class.”
    Andrew Peters, JMDA Ltd
    Andrew Peters, JMDA Ltd
  • “We use Plunkett Associates because we want someone we can trust, that knows what they’re talking about, has all the contacts, will provide reliable advice and feedback and will get the right result for us.”
    Jim Copestick. Design Manager, Thorlux Lighting
    Jim Copestick. Design Manager, Thorlux Lighting
  • “We always know exactly what we’re getting and we know we won’t be let down on quality, price or lead times.”
    Mark Williams, Research and Development Director, Johnson Safety Products
    Mark Williams, Research and Development Director, Johnson Safety Products
  • “Plunkett Associates truly offer a complete turnkey solution with Speed, Effectiveness and Precision.”
    David Harden, Director, Enica Ltd
    David Harden, Director, Enica Ltd
  • “Kirintec were thrilled with Plunketts. They made a complex process simple and we were just amazed at the lead times achieved. Plus, every single deadline was met without any drama.”
    Penny While, Marketing Director, Kirintec
    Penny While, Marketing Director, Kirintec
  • “Thanks to Plunkett Associates flexible, bespoke and cost effective service I was able to produce the objects that I had originally had in mind.”
    Simon Ryder, Artist
    Simon Ryder, Artist
  • To create such a consistent quality finish in chrome was an amazing achievement and the prototypes really gave our stand the wow factor.
    James Clark, Group Commercial Director, The Airdri Group
    James Clark, Group Commercial Director, The Airdri Group
  • Interestingly, people who look at it in its own right with little knowledge of what it does, just like it! It’s tactile and it looks good…
    Tim Collings, Operations Director, Troika Systems Ltd
    Tim Collings, Operations Director, Troika Systems Ltd
  • "With their simple to understand language, willingness to go the extra mile and approachability, Plunkett Associates were a great partner for our company. We couldn’t be happier with the results of our project. (A working prototype that they got right first time, by the way). Thank you!"
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
    Carolina Ballon-Forrester, Director, Kittyrama Ltd
  • Plunkett Associates worked on the design and production of titanium frames for an artificial heart valve where precision and consistency was paramount. Communications were efficient and productive with concepts readily incorporated into the final design, and suggestions for improvements all highly appropriate. The quality of the end product was ideal and I have no doubt that I will use the advice and expertise of Plunkett Associates again.
    David Wheatley, Wheatley Research Ltd
    David Wheatley, Wheatley Research Ltd
  • “Thanks for the present that arrived this morning, as promised. Parts look first class, as always.”
    Jon Todd, Design Manager, PHS Group
    Jon Todd, Design Manager, PHS Group
  • “Plunkett Associates have a fantastic supply chain, work with all sorts of production processes and will always do their utmost to solve a problem.”
    Naim Audio
    Naim Audio
  • “ Plunketts developed a solution that met our precision requirements at a cost significantly lower than alternative manufacturing approaches we had investigated”
    Nick Skaer, CEO, Orthox Ltd
    Nick Skaer, CEO, Orthox Ltd
  • “Doing business with you has been an absolute pleasure. You have made my goals a reality. You have been patient, helpful and above all, responsive. Best service that I have experienced in ages. I consider Plunkett Associates to be an integral part of my business plan moving forward.”
    Jet Cooper, Sculptor
    Jet Cooper, Sculptor